Discover a range of power quality monitors for single and multiple feeders, including portable and DIN-rail options. Ensure reliable energy monitoring for every application. Explore our products now!
Device Distribution
Power Quality Monitors
MEg45PAN – single feeder(3 phases) monitor with display
The panel universal PQ Monitor MEg45PAN is designed for measurement with remote communication at the LV level, it measures three voltage values and three current values and can also be used for single-phase measurements. Its functionalities include direct measurement and display of measured quantities, recorder, electricity meter, voltage quality analysis and recording of ripple control telegrams, which it performs simultaneously, without interruptions and pauses. It can also be used for the oscillographic recording of all the measured quantities.For remote transmission of measured data and parameterization of measurements, it has RS485, ETH and GSM interfaces. It also contains a GPS time synchronization module.
MEg45DIN – single feeder(3 phases) monitor on rail
The MEg45DIN universal PQ monitor is designed for measurement at the LV level and transmits the measured data securely according to IPsec protocols via an ETH interface and GSM network, briefly even after a power outage of all three phases.It measures three voltages, three currents and two temperatures. It can also be used for single-phase measurements. It functions as a recorder, electric meter, voltage quality analyzer and recorder of HDO (ripple control system) telegrams simultaneously without interruptions and gaps. It can be used for oscillographic records of all measured alternating voltages and currents. For remote transfer of measured data and measurement parametrization, it has an RS485 and ETH interface and contains a GSM communication module. For time synchronization with a resolution of 1 ms, it contains a GPS time synchronization module.
MEg38 – portable single feeder(3 phases) monitor
The PQ monitor MEg38/C is intended for measuring and recording of four voltages and four currents, active and reactive powers and energies in three-phase LV, MV and HV networks. It analyses and evaluates voltage quality parameters on the voltages inputs U1, U2 and U3 in accordance with EN 50160 ed. 3 and measurement methods of class S of EN 61000-4-30 ed. 2. In the functions of quality measurement and in the function of waveform recording, it evaluates all quantities without gaps and interruptions. The monitor MEg38/C can be used also for oscillographic recording of measured quantities enabled by events or voltages on the input U4. Using the user software functions, it is possible to select capacitor values of compensation batteries and set the breakdown switch value.
MEg74 – multiple(up to 12) feeders(3 phases) monitor
The multiple input monitor MEg74 is designed for long-term operation in both newly built and already operating low-voltage level stations or cabinets. It is characterized by variability and expandability during operation and cost reduction in operation and maintenance. This is enabled by automatically detected current sensors and uniformly calibrated current inputs of the monitor according to the EN IEC 61869-10 standard. The result is a widely applicable measuring instrument with accuracies meeting operational requirements, characterized by robustness, connector interchangeability, and long-term stability.
MEg39 – single feeder monitor for MV(3 currents, 4 voltages)
PQ monitor MEg39 is designed for permanent measurement and recording of four voltages and four currents, powers and energies in networks with MV, HV and EHV level. It provides the functions of recording, electricity meter and analysis of voltage quality, all performed simultaneously. In the class A voltage quality analyser function the monitor evaluates all parameters required by standard for measured three voltages and three currents. Monitor MEg39 can be also used for oscillographic record of measured quantities and harmonic analysis of measured quantities up to the order of 125.The MEg39 unit is in a polycarbonate self-extinguishing box designed for TC35 DIN rail mounting. The monitor is to be installed under the cover of switchgear where device front panel goes thru cover and terminals with measured signals are safely under cover.
Current Sensors/Transformers
Explore a variety of current sensors and transformers, including split-core models and options for primary currents up to 500 amps. Precision solutions for efficient energy monitoring.
Sensor for alternating currents AMOSM – current sensor
The active flexible sensor for alternating currents AMOSM has been designed for the measurement of alternating currents in LV distribution networks. It is characterized by a small diameter of the sensing loop and by increased resistance against running-down water. As the AMOSM sensors are manufactured only for one measuring range, this range has been extended. The AMOSM sensor converts the alternating current onto the AC voltage. Thanks to the active processing of the signal in the amplifier and to the design of the sensing loop it measures the currents in a wide frequency range with minimized phase shift between the current being measured and the output voltage. AMOSM sensors have been designed for the measurement of alternating currents by PQ monitors, type MEg3x. However, they may be modified for the measurement of currents by other instruments as well. Accuracy of the measurement of the current by flexible AMOSM sensors depends on the location of the closure of the loop of the sensor with regard to the conductor through which the current being measured flows. The AMOSM sensor is calibrated when the closure of the loop is situated as far as possible from this conductor. It is also useful that the closure of the loop may be situated as far as possible from neighbouring conductors in order to reduce the influence of currents flowing in the neighbouring conductors on the output voltage of the sensor. Both parts of the closure must be fully plugged-in when measuring the currents.
AMOS/1A single-phase flexible sensor with a current output
The AMOS/1A single-phase flexible sensor is designed to convert alternating current of mains frequency for measuring instruments with a standard 1 A current input. It consists of two structural parts, a flexible part sensing the alternating current based on the Rogowski coil principle and a converter unit with the integrator and converter functions. The flexible sensing part is characterized by a small diameter, resistance against water and the effects of external alternating magnetic fields and good flexibility. It is produced in three lengths of the sensing part, AMOS M standard – 40 cm, AMOS M long – 60 cm and AMOS M short – 20 cm.The converter unit has high efficiency even with the output power of 2.5 VA, a wide range of DC supply voltage and a compact design.
SMART split core current transformer PTD
The SMART split core current transformer PTD is installed in low voltage networks onto live and insulated wires. In its operating state, the transformer is characterized by insulation that complies with surface and air distances of the measurement category CAT IV. The transformer PTD can be easily installed into already operated low voltage switchgear assemblies and live busbars without necessity of their mechanical adjustments. It is suitable as an alternating current sensor for modern low power measuring systems.
Measuring transformer MEgMT from 100A to 500A
A measuring transformer with nominal Iprim = up to 500 A. MEgMT has been designed for the measurement of currents by universal panel-mounted monitors MEg40 and by PQ monitors. It may be also used for other measuring instruments and systems with a low consumption.